< Home
Parts and add-ons

Add-ons
-
Nomad charger kit
17.00€ VAT incl.Add to cartThe kit contains 1 Powerbank, of 1500 mAh capacity, 3.7 volt + the USB Charger, it can be used as a nomad charger for your MetaFly standard (it is included already in the upgrade kit). It will allows more than 10 recharges outdoor. It will save the power of the batteries inside the controller that will then last for months (MetaFly).
-
USB charger
10.00€ VAT incl.Add to cartThe kit contains 1 charge device and its USB cable. It will allow you to charge your MetaFly from any USB power source (Computer USB port, smartphone wall charger, car usb port, smartphone powerbank etc), instead of using the batteries of the controller.
For your MetaBird, it is already including in the product. So it’s a replacement part if you’ve lost it.
-
Wings & tail special edition kit
11.90€ VAT incl.Add to cartThe kit contains 1 “special edition” pair of wings and 1 tail for MetaFly to customize its appearance.
This product is composed of Mylar, carbon fiber and liquid crystal polymer.
This kit is not suitable for bird models (BionicBird, MetaBird).Check how to install them in the tutorials section here: bionicbird.com/world/how-to-fly-mf
Spare parts
-
MetaFly battery
6.00€ VAT incl.Add to cartThe kit contains 1 Battery. It’s a replacement part for the original MetaFly battery in case it’s damaged.
Please check if you feel able to install them prior to buy, as it may require some difficult operations. -
MetaFly complete body
60.00€ VAT incl.Add to cartThe kit contains 1 Full MetaFly body, including all the motors, the battery, the head. You just need the legs, tail, rudder and wings to be ready to fly. It’s a replacement part for the original MetaFly body in case you lost or broke it.
Check how to install it in the tutorials section here: bionicbird.com/world/how-to-fly-mf -
MetaFly controller
40.00€ VAT incl.Add to cartThe kit contains 1 Controller, and its 2 aluminum sticks. It’s a replacement part for the original MetaFly controller in case you lost or broke it.
Check how to bind it with the MetaFly in the tutorials section here: bionicbird.com/world/how-to-fly-mf -
MetaFly head
5.00€ VAT incl.Add to cartThe kit contains 1 Head. It’s a replacement part for the original MetaFly head in case you lost or broke it.
-
MetaFly legs
2.50€ VAT incl.Add to cartThe kit contains 2 front legs, one left and one right It’s a replacement part for the original MetaFly legs in case you damaged them.
Check how to install them in the tutorials section here: bionicbird.com/world/how-to-fly-mf -
MetaFly side covers
8.00€ VAT incl.Add to cartThe kit contains 2 Side covers, one left and one right. They are replacement parts for the original MetaFly side covers in case you damaged it.
Please check if you feel able to install them prior to buy, as it may require some difficult operations. -
Rudder for MetaFly
2.50€ VAT incl.Add to cartThe kit contains 1 Rudder. It’s a replacement part for the original MetaFly rudder in case you lost or broke it.
Check how to install it in the tutorials section here: bionicbird.com/world/how-to-fly-mf -
Wings & tail standard edition kit
11.90€ VAT incl.Add to cartThe kit contains 1 pair of standard wings and 1 tail for MetaFly.
The product is composed of Mylar, carbon fiber and liquid crystal polymer.
It is not adaptable on our birds models.Check how to install them in the tutorials section here: bionicbird.com/world/how-to-fly-mf

Add-ons
-
Power bank
10.00€ VAT incl.Add to cart1 Powerbank, of 1500 mAh capacity, 3.7 volt.
For your MetaBird it can be used as a nomad charger. It will allows more than 10 recharges outdoor. All you have to do is plug the MetaBird charger into it, like into a USB port.
*For your MetaFly standard (it is included already in the upgrade kit) It must be used in combination with the USB Charger, so it is best to buy the complete kit here.
-
Lagoon-Fly Tail
4.00€ VAT incl.Add to cartThe kit contains 1 blue tail for Avitron KidZ. This is the color of the Avitron Kidz version but it is suitable for all models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Lagoon-Fly Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of blue wings for Avitron KidZ. This is the color of the Avitron Kidz version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Orange-Sun tail
4.00€ VAT incl.Add to cartThe kit contains 1 red tail for Avitron RC2.4G. This is the color of the Avitron RC2.4G version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Orange-Sun Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of red wings for AvitronRC2.4G. This is the color of the Avitron RC2.4G version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Blue-Horizon Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of wings blue/black for Avitron v2.0. This is the color of the Avitron v2.0 version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
Spare parts
-
USB charger
10.00€ VAT incl.Add to cartThe kit contains 1 charge device and its USB cable. It will allow you to charge your MetaFly from any USB power source (Computer USB port, smartphone wall charger, car usb port, smartphone powerbank etc), instead of using the batteries of the controller.
For your MetaBird, it is already including in the product. So it’s a replacement part if you’ve lost it.
-
Furtive Black Wings and Tail kit
10.00€ VAT incl.Add to cartThe kit contains 1 pair of wings and 1 tail in the original “carbon design” for Bionic Bird (all versions) and Metabird. This color is the same as the Bionic Bird version but is adaptable to all bird models!
This product is made of Mylar, carbon fiber and liquid crystal polymer.
Previous birds
-
Lagoon-Fly Tail
4.00€ VAT incl.Add to cartThe kit contains 1 blue tail for Avitron KidZ. This is the color of the Avitron Kidz version but it is suitable for all models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Lagoon-Fly Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of blue wings for Avitron KidZ. This is the color of the Avitron Kidz version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Orange-Sun tail
4.00€ VAT incl.Add to cartThe kit contains 1 red tail for Avitron RC2.4G. This is the color of the Avitron RC2.4G version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Orange-Sun Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of red wings for AvitronRC2.4G. This is the color of the Avitron RC2.4G version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Blue-Horizon Wings
6.00€ VAT incl.Add to cartThe kit contains 1 pair of wings blue/black for Avitron v2.0. This is the color of the Avitron v2.0 version but it fits on all Bionic Bird and MetaBird models! The product is composed of Mylar, carbon fiber and liquid cristal polymer.
-
Furtive Black Wings and Tail kit
10.00€ VAT incl.Add to cartThe kit contains 1 pair of wings and 1 tail in the original “carbon design” for Bionic Bird (all versions) and Metabird. This color is the same as the Bionic Bird version but is adaptable to all bird models!
This product is made of Mylar, carbon fiber and liquid crystal polymer.
-
Portative Egg Charger
29.99€ VAT incl.Add to cartReplacement part for the Bionic Bird egg charger.
Compatibility: Bionic Bird
Warning: May NOT be compatible for a replacement of the Bionic Bird Deluxe pack egg version 1. Before ordering, please contact our customer service.
-
USB Cord Bionic Bird
2.00€ VAT incl.Add to cartIt is the USB cord as included in all Bionic Bird versions, for replacement in case of loss.
* Warning: It’s the cord alone, It doesn’t include the Bionic bird charger. It is suitable to charge the egg.
Experiences
If you have any questions or hesitations, please do not hesitate to let us know. We will answer as soon as possible.
Designed in France, our products benefit from such rigorous quality control that each bird is a prototype.
However, some birds require a simple adjustment from the first flights: watch our video tutorials, check if your answer is in the FAQ or download a manual in the Help section.
If by misfortune your product has a defect of any kind, please send us a message. Our after-sales service is one of the most efficient in the industry.
XTIM SAS – 77 rue de Lyon 13015 Marseille France
+33 4 84 18 52 36